Set STATIC IP on Fedora 21

  1. From ip link show command, find the network interface you want to make static.

    [0]ip link show
    1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: em1: mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
        link/ether 2c:27:d7:2b:ee:76 brd ff:ff:ff:ff:ff:ff

  2. In /etc/sysconfig/network-scripts/ifcfg-em1

    TYPE="Ethernet"
    DEVICE="em1"
    ONBOOT="yes"
    NM_CONTROLLED="no"
    BOOTPROTO="static"
    IPADDR=172.17.172.79
    NETMASK=255.255.252.0
    GATEWAY=172.17.172.1

  3. In /etc/resolv.conf

    search yourdomain.com
    nameserver 172.xx.xx.xx
    nameserver 172.xx.xx.xx

  4. Please leave a comment or g +1 or share on f or share on t below if this post helped you. This will keep me motivating.
No comments:

How to Install PasswordSafe on Fedora 21




Note: I tried to install PasswordSafe on Fedora 20 but it was not able to resolve dependencies. Finally succeeded on Fedora 21.
  1. Download .rpm from - http://sourceforge.net/projects/passwordsafe/files/Linux-BETA/0.95/
    I downloaded pwsafe-0.95.1BETA-3.x86_64.rpm
  2. Switch to root and copy the .rpm file to /root
  3. Run "yum -y install pwsafe-0.95.1BETA-3.x86_64.rpm"
    It resolved dependencies and installed them
    wxBase3.x86_64 0:3.0.2-2.fc21
    wxGTK3.x86_64 0:3.0.2-2.fc21
  4. Please leave a comment or g +1 or share on f or share on t below if this post helped you. This will keep me motivating.
1 comment:

VNC copy paste not working between client and VNC session

1. For windows XP run C:\Windows\System32\clipbrd.exe
For Win 7 / 8 where clipbrd.exe is missing, you can download it from here - http://www.thewindowsclub.com/downloads/Clipboard-Viewer.zip?e42721

2. Make sure vncconfig is not not running.

3. Add vncconfig -nowin -poll=500 & in your xstartup file. For linux your xstartup file will be under ~/.vnc/xstartup

This should work.
No comments:
Subscribe to: Posts (Atom)